![]() If your sprinkler head does not rotate, it could be due to low water pressure or clogging. ![]() As a result, the sprinkler head cannot move quickly in and out, and the only remedy is to replace the head. This causes the head to get stuck and not move.ĭue to too much soil or sand, the seal and the riser can be excessively scratched, causing the surface to be rough. If your sprinkler head does not pop up or retract, soil could be lodged in the tiny space between the riser stem and the cap. Other reasons for replacing the sprinkler head and how to troubleshoot include: Sprinkler Head Is Stuck Sprinkler heads undergo normal wear and tear, and you will eventually need to replace them. Adjust the head to face the direction in you want it to spray water.Ĭheck out the video that shows you how to replace a Hunter PGP sprinkler head:Ĭommon Reasons To Replace A Sprinkler Head.Screw your new riser with the sprinkler head to the coupling of the irrigation pipe.Release the keeper clip to allow the sprinkler head to snap back into place.You can find this set of sprinkler head nozzles on Amazon. Afterward, turn the adjustment tool anticlockwise and pull it out.Turn your adjustment tool clockwise to tighten the set screw, securing the nozzle.Insert the nozzle into the nozzle hole, aligning the ears to where the set screw sits.Turn the tool clockwise until the set screw peep into the nozzle hole.Insert the steel hex of your adjustment tool into the hole above where the nozzle sits.This keeps the sprinkler head lifted out of the riser, allowing you to insert the nozzle. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |